HORN ANTENNA

The antenna which has the shape of horn is called as ‘Horn Antenna’. Its shape is as because of a waveguide has one end of which is flared out.

A waveguide is a hollow metallic tube and in this metallic tube EM waves travels. When the waveguide is excited at one end and open at the second end, it radiates but this radiation is very poor and non-directive pattern results because of the mismatch between the waveguide and free space. For improving this radiation the mouth of the waveguide is flared out, than the radiation efficiency, directive pattern and directivity will improve.

Types of horns:

  • Sectoral horn
  • Pyramidal horn
  • Conical horn.

The Sectoral horn is of two types:

  1. H-plane Sectoral horn
  2. E-plane Sectoral horn

A Sectoral horn is a horn in which flaring exists only in one direction. If flaring is along the direction of the electric field, it is called sectoral E-plane horn. If flaring is along the direction of the magnetic field, it is called sectoral H-plane horn.

H-Plane Horn Antenna
Sectoral H-plane Horn
E-Plane Horn Antenna

Sectoral E-plane Horn

If flaring is along E and H, the horn is called pyramidal horn. It has the shape of a truncated pyramid.

Pyramidal Horn Antenna
Pyramidal Horn

The basic parameters of horn antenna are described below

Parameters of Horn Antenna
Horn Parameters

Operation   

  • The electromagnetic wave propagation in a waveguide is different from that of free space due to the waveguide impedance is deferent to the free space impedance.
  • The conducting walls are restricting the propagation of waves and waves will reflect again and again in the waveguide.
  • When the wave will reach the mouth of the waveguide, waves spread laterally and wavefront becomes spherical.
  • At the mouth of the wave-guide, there exists a near-field region where the wavefront is a complicated one.
  • This is considered to be the transition region where change of propagation from waveguide to free space takes place.
  • As the waveguide impedance and free space impedance do not match, walls of the waveguide are flared out. This flared out structure is called a horn.
  • The flaring provides impedance matching, more directivity, and narrow beamwidth.
  • Horn produces a uniform plane wavefront with a larger aperture in comparison to a waveguide. As the aperture is large, directivity is high.

The design equations of horn antenna are:

Half-power beam width (HPBW) of optimum flared horns are

Applications of horns

  1. Horn Antenna uses for moderate gains at microwave frequencies.
  2. It is used as a primary or feed element in a dish antenna.
  3. Horn antenna is used for measurement of different antenna parameters in laboratories.

Leave a Reply

Your email address will not be published. Required fields are marked *

Translate »
error

Enjoy this blog? Please spread the word :)